AUTOTERM
Flow 14D
A large liquid heater commonly used for engine preheating in passenger cars, vans, motorhomes, and boats with engine coolant capacities from 25 to 30 liters. It can also be utilized to build versatile full-stack heating solutions for water and interior heating.
POWERFULL, RELIABLE, EFFICIENT
KEY BENEFITS
Reliability
Reliable operation in low temperatures as low as -45°C/-49°F
Universal Usage
This heater can be utilized for all forms of engine, water, and air heating in any vehicle type.
High Efficiency
The heater consumes a maximum of 1.20 liters of diesel per hour.
Extended Warranty
If installation is registered by a certified AUTOTERM service, the warranty extends to 3 years or 1000 hours.
POWER WITHOUT BULKY INSTALLATIONS
These heaters thin coolant hoses make it easy to install them even in tight compartments.
EASY TO INSTALL & RETROFIT
All AUTOTERM Air 4D heater standard kits include all essentials for both new and retrofitting installations.
THE STANDARD KIT INCLUDES:
MOST POPULAR APPLICATIONS
Trusted across industries and adventures.
Big Campervans and Motorhomes
Great for engine pre-heating and interior heating in big campervans.
Trucks
Saves fuel by preheating the engine before driving and can also be used to heat the cargo compartment, maintaining the proper temperature for goods during transit.
Boats and Yachts
Commonly used in large boats and yachts for interior heating and frost & mold protection during the off-season
Speciality Vehicles
Keeps the vehicle's engine warm and ready to go any time, as well as heats the compartment.
Off-Highway
Preheats both the engine and interior, making cold starts easier while improving comfort in the working environment during cold mornings.
COMPATIBLE WITH MULTIPLE CONTROL OPTIONS
Comfort Control
This panel features multiple work modes, advanced timers, multilingual support, and intuitive usage, making it a favorite among AUTOTERM users.
Comfort Boiler Control
This panel offers all the same features as Comfort Control, plus the ability to control AUTOTERM heaters and boilers simultaneously.
Modem QSTART
Plug & Play device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore).
Push Control
User-friendly control option that delivers various operation modes. It comes together with a control module and a wire to connect to the heater.
CUSTOMIZED COMFORT WITH DIFFERENT WORKMODES
Workmodes might change depending on the used Control Panel!
PRE-HEATING MODE
The heater runs until the coolant reaches a set temperature, then shuts off the combustion. Once the coolant cools down, the heating starts again.
ECO MODE
A pre-heating mode that uses less power and fuel, allowing the coolant to reach the desired temperature more gradually than in the standard mode.
LIQUID HEATERS EXPLAINED!
Engine Pre-Heating, Power Output, Installation, & More!
Flow 14D SPECIFICATION
| Specification | Value | Unit |
|---|---|---|
|
Voltage
|
12V or 24 | V |
|
Heating medium
|
Coolant, antifreeze coolant | - |
|
Optimal liquid/coolant volume
|
25 - 30 | Liters |
|
Coolant liquid flow rate at 0 bar pressure in the system
|
2000 | l/h |
|
Coolant liquid flow rate at 0.18 bar pressure in the system
|
1300 | l/h |
|
Heating power
|
14.5 | kW |
|
Power consumption
|
46 - 124 for 12V version | 46 - 113 for 24V version | W |
|
Max. work altitude (MASL)
|
1000 | m |
|
Fuel
|
Diesel - EN590 | HVO100 - EN15940 | m |
|
Fuel consumption
|
0.70 for 12V Version | 0.5 - 1.2 for 24V Version | l/h |
|
Coolant inlet / outlet diameter
|
OD - Ø 20 | mm |
|
Control mode
|
Manual, standard remote control, modem | - |
|
Compatible control panels
|
Comfort Control, Comfort Boiler Control, Push Control, Modem Q-Start, (OLED Control panel Discontinued) | - |
|
Weight of the heater
|
5.7 | kg |
|
Weight of the set
|
16 | kg |
|
Heater dimensions
|
340x160x206 | mm |
|
Package dimensions
|
88x33x30 | cm |