English
MINOX 12 C - Liquid heat exchanger with fan

Air flow: 700 m3/h / 12V / 11.9 kW

Assy: FR015

Technical parameters:

Voltage: 12V

Nominal air flow: 700 m3/h

This heat exchanger has a 3-speed fan

Heating capacity, Ethylene glycol: 11.9 kW

Inlet & outlet for ethylene glycol: ø16 mm

Maximum allowable inner temperature °C: 100

Maximum reachable inner temperature with AUTOTERM Flow series heater °C: 88


For fan speed control optional 4 position rotary switch FR018 is required.

* 4-pin connector kit FR051 available separately - not included in kit


Liquid heat exchanger with the fan is suitable for all the following liquid heaters:


Manufacturer: SIROCO

It is a heat exchanger that works as a radiator with an active fan that distributes hot air around the room it has been installed. 

As this liquid heat exchanger can run independently without AUTOTERM Flow series heater tuned on, it can be used to circulate air in the room.


As an alternative, heat exchanger can be linked with engines coolant system instead of AUTOTERM Flow series heater.

It is a heat exchanger that works as a radiator with an active fan that distributes hot air around the room it has been installed. 

As this liquid heat exchanger can run independently without AUTOTERM Flow series heater tuned on, it can be used to circulate air in the room.


As an alternative, heat exchanger can be linked with engines coolant system instead of AUTOTERM Flow series heater.

Installation Manuals

Voltage
12 V
Electrical power
250 W
Weight
4.6 kg
Nominal air flow
700 m3/h
Heating capacity, Ethylene glycol
11.9 kW