AUTOTERM CHX SILVER

AUTOTERM
CHX SILVER

Assy: FR058

Liquid heat exchanger for room heating, equipped with 2 internal fans and a radiator. Each fan can be controlled additionally if needed or both together by a fan speed regulator.

1.4kW
Power
140m3/h
Air Flow
12/24V
Voltage
LOW NOISE & LOW CONSUMPTION

LOW NOISE & LOW CONSUMPTION

Equipped with low noise & low power consumption fans it is a great addition of comfort in your vehicle.

COMPATIBILITY

COMPATIBILITY

With a heating capacity of 1.4 kW and a hot air flow rate of 140 m³/h, the AUTOTERM CHX is an excellent choice for campervans, RVs, and boats.


It pairs perfectly with any AUTOTERM Flow series liquid heater for enhanced comfort and efficiency.

CONTROL OPTIONS FOR AUTOTERM CHX

AUTOTERM Fan speed control FC9

AUTOTERM Fan speed control FC9

Assy: FR060

FC9 is equipped with 4 sliders for smooth fan speed control. These 4 sliders can each be connected to a CHX heating matrix or each slider can be connected to an individual AUTOTERM CHX fan for even more precise control as each CHX heating matrix is equipped with 2 fans.

DC Output 0V-12V DC
Power output Up to 50W per channel
DC Input +12V (standard 4-pin connector)
Control Channels 4
LED Colour White, Blue, Green, Cyan, Red, Purple, Yellow
Dimension 148.5 x 42.5 x 75 mm
Front body Aluminium
  • 1-4 fan speed control
AUTOTERM Thermal fan controller CHM36

AUTOTERM Thermal fan controller CHM36

Assy: FR059

AUTOTERM CHM36 is a programmable controller with heating/cooling functions that work based on temperature read-out according to the set start-up and power-off temperature. This thermal fan controller is an excellent addition to the AUTOTERM CHX heating matrix for automatic room/space heating by your set temperature with our without additional fan speed controller AUTOTERM FC9.  

Voltage DC 12/24V
Front plate material Aluminum
Number of channel outputs 4 channels
Max power load per channel 30W
Dimensions 92 x 44 x 35 mm
  • Celsius / Fahrenheit degrees
  • Heating or cooling modes
  • Adjustable hysteresis
  • Temperature correction
  • Start time delay
Technical Data

AUTOTERM CHX Silver Specification

Specification Value
Voltage
12V/24V
Heating capacity
1.4 kW
Air flow rate
140 m3/h
Air flow static pressure
7.1 mm H20
Power consumption
14 W
Fan motor max. speed
3100 RPM
Fan noise level up to
44.5 dB
Heating medium
Ethylene glycol
Inlet & outlet for ethylene glycol
ø 16 mm
Max internal pressure
2 bar
Operating temperature range
-10 C deg. +80 C deg
Operating temperature range
-10 C deg. +80 C deg
Front frame/body
Stainless steel (AISI 304)
Weight
2.4 kg
Dimensions
336.17 x 157 x 81.88 m

WHERE TO BUY AUTOTERM PRODUCTS?