Autoterm.com - Products

Universal mounting bracket with pegs

Assy: AT5-0025-A24

For: Air 2D ; 4D; 316-grade stainless steel ; 243 x 203 x 23

This mounting bracket can be used stand-alone for:

Or as a support mounting bracket for:

Material: Stainless steel (AISI 316)

Dimensions: 243x203x235mm

To fit this mounting bracket on uneven surfaces it's possible to mechanically remove 1 peg from each side.

For installations with less space, we suggest checking out our other mounting bracket type (assy. AT0019).

** Please note that the heater's correct/allowed position & angle must be done according to the installation manual of the heaters.

Wall installation with combustion air inlet / exhaust outlet positioned downward

Wall installation with combustion air inlet / exhaust outlet positioned to the side

Underfloor installation with combustion air inlet / exhaust outlet positioned downward

Underfloor installation with combustion air inlet / exhaust outlet positioned to the side

Installation above the floor with combustion air inlet / exhaust outlet positioned downward

Installation above the floor with combustion air inlet / exhaust outlet positioned to the side

Ceiling installation with combustion air inlet / exhaust outlet positioned downward

Ceiling installation with combustion air inlet / exhaust outlet positioned to the side