Intuitive - Additional heating options
Due to the high demand of new control panel, Comfort Control at the moment is only available when purchased with 12V heaters. We highly appreciate you large interest in new control panel.
COMFORT CONTROL
Our air & liquid heaters have a new control panel that will help to control your Autoterm heater more conveniently and most easily.
Heating modes for air heaters |
TEMPERATURE MODE: Heater will maintain set temperature by reducing the heating power, without shutting off the combustion process. Heater will operate constantly at set power level. Heater will operate till the temperature is reached 1°C above the set temperature, shut off the combustion process and start to ventilate till the temperature drops 5°C below the set temperature. When temperature drops, heating starts again. Heater will operate till the specified temperature is reached then shuts off the combustion process and ventilation. After the temperature drops by specified degrees heating will start again. |
Heating modes for liquid heaters
|
PRE-HEATING MODE: Heater will operate till the certain coolant temperature is reached then shuts off the combustion process. After the temperature of the coolant drops heating will start again. (only for FLOW 14D) Pre-heating mode with reduced power and fuel consumption. Temperature of the coolant is reached slower than in “Pre-heating mode.” (only for Flow 5) Heater will operate till the specified interior temperature is reached then shuts off the combustion process. After the temperature drops by specified degrees heating will start again. Temperature is read by control panel. *for setting up “Thermostat mode” see instructions for AIR heaters. |
Temperature sensor
|
|
Timers
|
Heating mode can be chosen for each timer. Set timer is active continuously till disabled
|
Status display
|
|
Display dimensions (mm)
|
37 x 20
|
Control panel dimensions (mm)
|
|
Heating modes for air heaters |
TEMPERATURE MODE: Heater will maintain set temperature by reducing the heating power, without shutting off the combustion process. Heater will operate constantly at set power level. Heater will operate till the temperature is reached 1°C above the set temperature, shut off the combustion process and start to ventilate till the temperature drops 5°C below the set temperature. When temperature drops, heating starts again. Heater will operate till the specified temperature is reached then shuts off the combustion process and ventilation. After the temperature drops by specified degrees heating will start again. |
Heating modes for liquid heaters
|
PRE-HEATING MODE: Heater will operate till the certain coolant temperature is reached then shuts off the combustion process. After the temperature of the coolant drops heating will start again. (only for FLOW 14D) Pre-heating mode with reduced power and fuel consumption. Temperature of the coolant is reached slower than in “Pre-heating mode.” (only for Flow 5) Heater will operate till the specified interior temperature is reached then shuts off the combustion process. After the temperature drops by specified degrees heating will start again. Temperature is read by control panel. *for setting up “Thermostat mode” see instructions for AIR heaters. |
Temperature sensor
|
|
Timers
|
Heating mode can be chosen for each timer. Set timer is active continuously till disabled
|
Status display
|
|
Display dimensions (mm)
|
37 x 20
|
Control panel dimensions (mm)
|
|